2024-10-21 16:49:25 read - data: 
2024-10-21 16:49:25 send - data: 
 len:1
2024-10-21 16:49:27 read - data: 
2024-10-21 16:49:28 send - data:  
 len:2
2024-10-21 16:49:30 read - data: 
2024-10-21 16:49:30 send - data: 
 len:1
2024-10-21 16:49:32 read - data: 
2024-10-21 16:49:32 send - data: 
 len:1
2024-10-21 16:49:34 read - data: 
2024-10-21 16:49:34 send - data:  
 len:2
2024-10-21 16:49:36 read - data: 
2024-10-21 16:49:36 send - data: 
 len:1
2024-10-21 16:49:37 read - data: N
2024-10-21 16:49:37 read - data: E188
2024-10-21 16:49:37 read - data: >
2024-10-21 16:49:37 read - data: T
2024-10-21 16:49:37 read - data: LZMA

2024-10-21 16:49:37 read - data: 
UNZOK!dram ini ver[0x11230822, 0x11230822]

zq_trim[10, 11]

ddr_speed [4266 4266]

CPU1400 DONE
>
2024-10-21 16:49:37 read - data: S


2024-10-21 16:49:37 read - data: tRFC 140 ns

ddr0 size 2048 MB


2024-10-21 16:49:37 read - data: S


2024-10-21 16:49:37 read - data: tRFC 140 ns

ddr1 size 2048 MB


2024-10-21 16:49:38 read - data: RPA
ddr init done

UNZOK!
Loader Start ...
LD_VER 01.05.03

692_LPDDR4_Default_2133MHz 07/05/2024 18:33:32

[8bit]

2024-10-21 16:49:38 read - data: SD identify fail
card open fail
eMMC 1.8V setting

2024-10-21 16:49:38 read - data: EMMC: 8 bits
FW config 0x0

BOOT USER 0x0

BOOT WP 0x0

Erase Grp Size 8

WP Grp Size 1

EMMC
RR
2024-10-21 16:49:38 read - data: tmp_addr 0x08000000
LdCtrl2 0x00000008
l_bl31
RR
2024-10-21 16:49:38 read - data: bl31_addr 0x01F00000
bl31_size 0x00009088
l_uboot
Ruboot_addr 0x7E000000
R
2024-10-21 16:49:38 read - data: uboot_size 0x0009A518

2024-10-21 16:49:38 read - data: core_cnt= 0x00000004
smp(bl31)
fdt 0x00100000
shm 0x00A00000
        core2_jump 0xF12115FC
  code2JumpCodelen 0x00000010
      core2_entry2 0x00010000
       core2_entry 0xF121160C
 code2EntryCodelen 0x00000188
      core2_entry2 0x00010000
bl_core2_reset
64core2_jump_program 0x0100591A
64code2JumpCodelen 0x00000228
warm reset core0
jump_entry 0x01F00000

2024-10-21 16:49:38 read - data: ARC64**3*421###NOTICE:  BL31: v2.2(release):
NOTICE:  BL31: Built : 20:09:43, Jul  8 2024
NOTICE:  BL31: Found DTB
NOTICE:  TZASC config:
NOTICE:  
	0x00100000@0x01f00000 	(RW/N)	Ree
NOTICE:  arb_enable_wp level 0

NOTICE:  arb_enable_wp level 2

INFO:    ARM GICv2 driver initialized
INFO:    BL31: Platform setup done
INFO:    BL31: Initializing runtime services
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x7e000000
INFO:    SPSR = 0x3c9

2024-10-21 16:49:38 send - data: reboot
 len:7
2024-10-21 16:49:40 send - data: 
 len:1
2024-10-21 16:49:40 read - data: 

U-Boot 2021.10 (Jul 30 2024 - 19:59:01 +0800)62.8.7.4

CPU:   Novatek NT @ 1399 MHz
DRAM:  nvt_print_dram_setting: dram[0x0 - 0x80000000]
nvt_print_dram_setting: core2entry1[0x0 - 0x10000]
nvt_print_dram_setting: core2entry2[0x10000 - 0x10000]
nvt_print_dram_setting: fdt[0x100000 - 0x100000]
nvt_print_dram_setting: shmem[0xa00000 - 0x100000]
nvt_print_dram_setting: loader[0x1000000 - 0x100000]
nvt_print_dram_setting: shmem_amp[0x0 - 0x0]
nvt_print_dram_setting: atf[0x1f00000 - 0x100000]
nvt_print_dram_setting: teeos[0x0 - 0x0]
nvt_print_dram_setting: nsmem[0x0 - 0x0]
nvt_print_dram_setting: linuxtmp[0x2000000 - 0x72f00000]
nvt_print_dram_setting: uboot[0x7e000000 - 0x2000000]
nvt_print_dram_setting: rtos[0x0 - 0x0]
nvt_print_dram_setting: bridge[0x0 - 0x0]
nvt_print_dram_setting: memory[0x0 - 0x40000000]
nvt_print_dram_setting: all_in_one[0x74f00000 - 0x7800000]
nvt_print_dram_setting: kernel_img[0x7c700000 - 0x1900000]
nvt_print_dram_setting: dsp[0x0 - 0x0]
nvt_print_dram_setting: rtos_s0[0x0 - 0x0]
nvt_print_dram_setting: rtos_s1[0x0 - 0x0]
nvt_print_dram_setting: rtos_s2[0x0 - 0x0]
nvt_print_dram_setting: logo-fb[0x0 - 0x0]
nvt_print_dram_setting: logo2-fb[0x0 - 0x0]
2 GiB
Relocation to 0x7ff4a000, Offset is 0x01f4a000 sp at 7fb98dc0
nvt_shminfo_init:  The fdt buffer addr: 0x7fbcb180
otp_init[1.00.003]

otp_timing_reg= 0x8f2620

Read core power trim = 0x00000000

Read cpu over = 0x1

remap_data 8
get_pwr_id: get null pwr id
use default pwm

pwr idx: 12

pwmII_pinmux = 0x1000000
pwm_id(12) pwm_pinmux(0x1000000)
pclk_freq(30000000) div(3)
MMC:   nvt_pinmux_probe(pinmux= top_base=00000002f0010000, length=00000002f0010000):
pinmux_init, 1.00.01

top_config[4].config skip
top_config[5].config skip
SDIO0: sdio pinmux(0x711)
SDIO1: sdio pinmux(0x711)
SDIO2: sdio pinmux(0x711)
V0.00.007_NVT_MMC0: 0, V0.00.007_NVT_MMC1: 1, V0.00.007_NVT_MMC2: 2
Loading Environment from MMC... OK
 misc_init_r: Firmware name: FW98692A.bin FW98692T.bin FW98692A.fdt.bin  
 misc_init_r: boot time: 3183860(us) 
switch to partitions #0, OK
mmc2(part 0) is current device
nvt_emmc_set_bootbus: Set EMMC boot bus to 8-bit mode
Set to BOOT_BUS_WIDTH = 0x2, RESET = 0x0, BOOT_MODE = 0x0
nvt_detect_fw_tbin: Boot from flash or emmc
No need to update (FW98692A.bin) 

 nvt_getfdt_emb_part_info: Skip this partition node: partition_all 

MMC read: dev # 2, block # 512, count 1 ... 
2024-10-21 16:49:40 send - data: reboot
 len:7
2024-10-21 16:49:43 send - data: 
 len:1
2024-10-21 16:49:43 read - data: 1 blocks read: OK
nvt_fdt_init: nvt_fdt_init: cmd:mmc read 0x7fc86380 0x200 0x1

MMC read: dev # 2, block # 512, count 393 ... 393 blocks read: OK
 nvt_getfdt_emb_part_info: Skip this partition node: partition_all 
 misc_init_r: boot time: 3744962(us) 
DTS find cpu freq clock 1400MHz
Set CPU clk 1400MHz
DTS find apb freq clock 120MHz
 misc_init_r: boot time: 3756845(us) 
Net:   eqos_probe 1.0.0.8
DTS eth0@2,f04a0000 found

eqos_initialize 0x2f04a0000
eth_parse_phy_intf: get IO MEM 0x2f04a0000

eth_parse_phy_intf: ref-clk-out 0

eth_parse_phy_intf: pinmux detect RGMII 0x101

GPIO version: 1.0.01

Warning: eth0@2,f04a0000 MAC addresses don't match:
Address in DT is		02:11:22:33:44:55
Address in environment is	1c:c3:16:52:5f:d1
eth0: eth0@2,f04a0000
Hit any key to stop autoboot:  3  0
NT98692 # reboot

Unknown command 'reboot' - try 'help'
NT98692 # 

Unknown command 'reboot' - try 'help'
NT98692 # 
2024-10-21 16:49:43 send - data: 1111
 len:5
2024-10-21 16:49:43 read - data: 1111

Unknown command '1111' - try 'help'
NT98692 # 
2024-10-21 16:49:43 send - data: setenv bootdelay 3;
 len:20
2024-10-21 16:49:48 read - data: setenv bootdelay 3;

NT98692 # 
2024-10-21 16:49:48 send - data: printenv;
 len:10
2024-10-21 16:49:51 read - data: printenv;

ai_name=ai.bin 
arch=arm
baudrate=115200
blkdevparts=blkdevparts=mmcblk2:1536K(uboot),512K(env),512K(msenv),16M(kernel),256M(rootfs),64M(cfg),64M(oem),256M(ai),512M(update),64M(log),-(storage)
board=nvt-ns02201-a64
board_name=nvt-ns02201-a64
bootargs=rootwait debug_boot_weak_hash console=ttyS0,115200 root=/dev/mmcblk2p5 nvt_pst=/dev/mmcblk2p0  
bootcmd=ms_update 2 2 0;mmc read 0x7c700000 kernel; nvt_boot
bootdelay=3
bootfile=MSFImage
chipinfo=MSC53H2112E81F0En371NG0000002000
cpu=armv8
ethaddr=1C:C3:16:52:5F:D1
fdtcontroladdr=7fb98dd0
fs_name=rootfs.bin 
gatewayip=192.168.8.1
hostname=soclnx
ipaddr=192.168.8.170
ker_name=uImage 
ms_update_enable=1 
mskey=1CC334A0C8C8746C407D4E79AA4E5127
msran=0F030E080B0E0109090B0E0B03000C0F
netmask=255.255.254.0
serverip=192.168.8.140
sncode=328524380LG6
soc=nvt-ns02201_a64
stderr=serial
stdin=serial
stdout=serial
uboot_name=uboot_4096M 
update_uboot=tftp 0x44000000 ${uboot_name};mmc erase.part uboot;mmc write 0x44000000 uboot
vendor=novatek
ver=U-Boot 2021.10 (Jul 30 2024 - 19:59:01 +0800)62.8.7.4
wifiap_mac=1C:C3:16:52:5F:D2

Environment size: 1078/524284 bytes
NT98692 # 
2024-10-21 16:49:51 send - data: mmc erase.part msenv
 len:21
2024-10-21 16:49:51 read - data: mmc erase.part msenv

Capacity: 3959422976 (3776MB), count=00760000


MMC erase: dev # 2, block # 4096, count 1024 ... 
2024-10-21 16:49:51 read - data: 1024 blocks erased: OK
NT98692 # 
2024-10-21 16:49:51 send - data: mw.b 0x1800000 0xff 0x100000;tftp 0x1800000 /BurnDir/uboot_4096M;mmc erase 0 0xC00;mmc write 0x1800000 0 0xc00;
 len:112
2024-10-21 16:49:51 read - data: mw.b 0x1800000 0xff 0x100000;tftp 0x1800000 /BurnDir/uboot_4096M;mmc erase 0 0xC00;mmc write 0x1800000 0 0xc00;


2024-10-21 16:49:54 read - data: 
2024-10-21 16:49:57 read - data: 
2024-10-21 16:50:00 read - data: 
2024-10-21 16:50:02 read - data: 
2024-10-21 16:50:05 read - data: 
2024-10-21 16:50:06 send - data: mmc erase.part msenv
 len:21
2024-10-21 16:50:08 send - data: setenv ethaddr 1C:C3:16:52:5F:D1;
 len:34
2024-10-21 16:50:08 send - data: setenv wifiap_mac 1C:C3:16:52:5F:D2;
 len:37
2024-10-21 16:50:10 read - data: 
2024-10-21 16:50:10 send - data: 
 len:1
2024-10-21 16:50:10 send - data: setenv sncode 328524380LG6;
 len:28
2024-10-21 16:50:11 read - data: Using eth0@2,f04a0000 device
TFTP from server 192.168.8.140; our IP address is 192.168.8.170
Filename '/BurnDir/uboot_4096M'.
Load address: 0x1800000
Loading: *
ARP Retry count exceeded; starting again

MMC erase: dev # 2, block # 0, count 3072 ... 
2024-10-21 16:50:11 send - data: setenv chipinfo MSC53H2112E81F0En37ING0000002000;
 len:50
2024-10-21 16:50:11 read - data: 3072 blocks erased: OK

MMC write: dev # 2, block # 0, count 3072 ... 
2024-10-21 16:50:11 send - data: saveenv;
 len:9
2024-10-21 16:50:11 read - data: 3072 blocks written: OK
NT98692 # setenv chipinfo MSC53H2112E81F0En37ING0000002000;

NT98692 # saveenv;

Saving Environment to MMC... 
2024-10-21 16:50:11 send - data: setenv mskey 1CC334A0C8C8746C407D4E79AA4E5127;
 len:47
2024-10-21 16:50:11 read - data: Writing to MMC(2)... 
2024-10-21 16:50:11 send - data: setenv msran 0F030E080B0E0109090B0E0B03000C0F;
 len:47
2024-10-21 16:50:11 read - data: OK
NT98692 # setenv mskey 1CC334A0C8C8746C407D4E79AA4E5127;

NT98692 # setenv msran 0F03
2024-10-21 16:50:11 send - data: setenv serverip 192.168.199.100;
 len:33
2024-10-21 16:50:11 read - data: setenv serverip 192.168.199.100;

NT98692 # 
2024-10-21 16:50:11 send - data: printenv serverip;
 len:19
2024-10-21 16:50:11 read - data: printenv serverip;

serverip=192.168.8.140
NT98692 # 
2024-10-21 16:50:11 send - data: setenv netmask 255.255.254.0;
 len:30
2024-10-21 16:50:11 read - data: setenv netmask 255.255.254.0;

NT98692 # 
2024-10-21 16:50:11 send - data: setenv ipaddr 192.168.192.115;
 len:31
2024-10-21 16:50:11 read - data: setenv ipaddr 192.168.192.115;

NT98692 # 
2024-10-21 16:50:11 send - data: setenv gatewayip 192.168.192.1;
 len:32
2024-10-21 16:50:11 send - data: saveenv;
 len:9
2024-10-21 16:50:16 read - data: 
2024-10-21 16:50:16 send - data:  
 len:2
2024-10-21 16:50:17 read - data: setenv gatewayip 192.168.192.1;

NT98692 # saveenv;

Saving Environment to MMC... Writing to MMC(2)... OK
NT98692 #  

NT98692 # 
2024-10-21 16:50:17 send - data: mmc erase.part cfg;
 len:20
2024-10-21 16:50:17 read - data: mmc erase.part cfg;

Capacity: 3959422976 (3776MB), count=00760000


MMC erase: dev # 2, block # 562176, count 131072 ... 
2024-10-21 16:50:17 read - data: 131072 blocks erased: OK
NT98692 # 
2024-10-21 16:50:18 send - data: mmc erase.part oem;
 len:20
2024-10-21 16:50:18 read - data: mmc erase.part oem;

Capacity: 3959422976 (3776MB), count=00760000


MMC erase: dev # 2, block # 693248, count 131072 ... 
2024-10-21 16:50:19 read - data: 131072 blocks erased: OK
NT98692 # 
2024-10-21 16:50:19 send - data: setenv bootfile CCTV_burn/1.CCTV_image/MSFImage_62.8.0.4-b1;
 len:61
2024-10-21 16:50:19 read - data: setenv bootfile CCTV_burn/1.CCTV_image/MSFImage_62.8.0.4-b1;

NT98692 # 
2024-10-21 16:50:19 send - data: download;
 len:10
2024-10-21 16:50:19 read - data: download;

Using eth0@2,f04a0000 device
TFTP from server 192.168.8.140; our IP address is 192.168.192.115; sending through gateway 192.168.192.1
Filename 'CCTV_burn/1.CCTV_image/MSFImage_62.8.0.4-b1'.

2024-10-21 16:50:19 send - data:  
 len:2
2024-10-21 16:50:19 read - data: Load address: 0x44000000
Loading: *
2024-10-21 16:50:21 read - data: 
2024-10-21 16:50:22 send - data:  
 len:2
2024-10-21 16:50:24 read - data: 
2024-10-21 16:50:24 send - data: 
 len:1
2024-10-21 16:50:26 read - data: 
2024-10-21 16:50:26 send - data: 
 len:1
2024-10-21 16:50:28 read - data: 
2024-10-21 16:50:28 send - data:  
 len:2
2024-10-21 16:50:30 read - data: 
2024-10-21 16:50:30 send - data: 
 len:1
2024-10-21 16:50:32 read - data: 
2024-10-21 16:50:32 send - data: 
 len:1
2024-10-21 16:50:34 read - data: 
2024-10-21 16:50:34 send - data:  
 len:2
2024-10-21 16:50:36 read - data: 
2024-10-21 16:50:36 send - data: 
 len:1
2024-10-21 16:50:38 read - data: 
2024-10-21 16:50:38 send - data: 
 len:1
2024-10-21 16:50:39 read - data: 
ARP Retry count exceeded; starting again
>>>>>Verify CCTV_burn/1.CCTV_image/MSFImage_62.8.0.4-b1 begin<<<<<
firmware verify err
download - Auto download firmware image from network to flash, then auto boot

Usage:
download 
NT98692 #